China wholesaler Vr1 Vr2 Vr3 Vr4 Vr6 Cage Guideways Cross Roller Linear Guide Rail

Product Description

Vr1 Vr2 Vr3 Vr4 Vr6 Cage Xihu (West Lake) Dis.ways Cross Roller Linear Xihu (West Lake) Dis. Rail

                     

Product Description

In the VR model, the precision rollers are combined with a roller retainer that is orthogonal to each other and is used in combination with a 90 ° V-groove rolling surface set on a dedicated track. By assembling 2 rows of roller guide rails in parallel, the guide rail system can withstand loads in 4 directions. Moreover, by applying preload to the cross roller guide rail, a sliding mechanism with no gaps, high rigidity, and light and fast movement can be obtained.

The VB type is a ball keeper B type that uses short pitch intervals to hold precision steel balls, combined with a dedicated track V type, and has a low friction, high-precision finite linear motion system.

Cross roller guide rails and ball guide rails are widely used in precision machines such as office equipment and its external devices, various measuring instruments, printing substrate drilling machines, or the sliding seats of optical measuring equipment, optical workbenches, control mechanisms, X-ray devices, etc.

Long service life and high rigidity
By utilizing a unique roller retention method, the effective contact length of the rollers has increased by 1.7 times compared to traditional products. Additionally, due to the shorter pitch interval of the rollers and the larger number of rollers, the rigidity has increased by 2 times, resulting in a 6-fold increase! The lifespan of. Therefore, for the vibration and impact problems that are prone to occur in linear motion parts, safety considerations can be fully considered in the design.
Smooth motion
In the VR model, each roller is separated and maintained by a cage, and due to the surface contact between the roller bag and the roller in the cage, there is good lubricating oil retention, so the wear is small and smooth rolling motion can be achieved.

Editing the Characteristics of 2-Cross Roller Xihu (West Lake) Dis.way
1. Low rolling friction and good stability performance;
2. Large contact area and small elastic deformation;
3. There are many effective exercise bodies, making it easy to achieve high rigidity and high load exercise;
4. Flexible structural design, easy installation and use, and long service life;
5. Mechanical energy consumption is low, accuracy is high, speed is fast, and load-bearing capacity is large.
Cross roller guide rail model and specifications:
V2 series, V3 series, V4 series, V6 series, V9 series, V12 series, V15 series, V18 series

Detailed Photos

Company Profile

BXY BRAND is a professional Bearing and Grease Manufacturer & Trader that focus on Research & Development, Design, Production and Sales of Bearing and Grease.There has been over 20years of experience in Bearing and Grease domestic & overseas market since we established. In addition to excellent OEM services, we also registered our own brand: BXY,QHW,SKYN,etc.

In order to supply better service and products for valued customers from all over the world, CHINAMFG BRAND follows the development policy of “quality-oriented, customer first” with the goal of “Zero Defect” and the core value of “Integrity of the root” to build CHINAMFG Industry into a modern enterprise company with advanced system, technology, management and beautiful environment. 

We use a fully automatic production line and advanced testing equipment to track and control the whole production process to ensure the stability and consistency of our quality.Meanwhile, the complete strict quality control process can ensure high quality from raw material purchasing to finished product.

Develop up to today, Bearings and Grease from factory are very popular all over the world, such as Russia, Spain, Brazil, America, South Africa, Southeast Asia and other countries.

Major Competitive Advantages
More than 20years of professional experience as a manufacturer of bearing and lubricating grease

·Diversification of packaging, standard industrial package or unique package on your request
·Strong researching and developing team to solve grease problems.
·Professional Technical Support
·Just-in-time delivery
·Small trial orders can be accepted
·Free sample is available
·High quality bearings with international standard

FAQ

Q1: How many the MOQ of your company?
A: Our company MOQ is 1pcs.

Q2: Could you accept OEM and customize?
A:YES, we can customize for you according to sample or drawing.

Q3: Could you supply sample for free?
A: Yes, we can supply sample for free, but need our customer afford freight.

Q4 : Does your factory have CE?
A: Yes, we have ISO 9001:2008, and SASO. If you want other CE, we can do for you.

Q5: Is it your company is factory or Trade Company?
A: We have our own factory; our type is factory

 

 

 

  
  
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Feature: Precision Instrument
Function: Super
Flange Shape: Square
Shape: Straight
Series: Vr
Material: Bearing Steel
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

linear rail

What are the reliability and durability aspects of linear rails in ensuring consistent linear movement?

The reliability and durability of linear rails are critical for ensuring consistent linear movement in various applications. Here are key aspects that contribute to their reliability and durability:

  • Materials: High-quality materials, such as hardened steel or reinforced alloys, are used in the construction of linear rails. These materials provide the necessary strength, wear resistance, and durability to withstand the stresses of continuous linear motion.
  • Surface Treatments: Surface treatments, including coatings and finishes, are applied to protect the linear rails from corrosion, abrasion, and other forms of wear. These treatments enhance the longevity of the rails, ensuring they maintain their performance over time.
  • Lubrication: Proper lubrication is essential for reducing friction between the rail and carriage. Lubrication not only minimizes wear but also contributes to smooth and consistent linear movement. Lubrication intervals and the choice of lubricants impact the overall reliability and performance of the linear rail system.
  • Sealing: Sealing mechanisms are employed to protect the internal components of the linear rail system from contaminants such as dust, debris, and moisture. Effective sealing enhances the reliability of the system by preventing damage to critical components and minimizing the risk of malfunction.
  • Rigidity: The rigidity of linear rails is crucial for maintaining consistent linear movement, especially under varying loads. Rigidity prevents deflection or bending of the rail, ensuring that the carriage follows a precise and predictable path during operation.
  • Load-Bearing Capacity: The load-bearing capacity of linear rails is a key factor in their reliability. Properly sized linear rails that match the application’s load requirements ensure consistent performance and prevent premature wear or failure.
  • Manufacturing Precision: High manufacturing precision in the production of linear rails contributes to their reliability. Precise machining and assembly processes result in consistent dimensions and tolerances, ensuring that the rail and carriage components fit together seamlessly for reliable linear motion.

Reliability and durability go hand in hand in ensuring consistent linear movement over the lifespan of the linear rail system. Regular maintenance, including inspections, lubrication, and replacement of worn components, further contributes to the sustained reliability of linear rails in industrial and automation applications.

linear rail

Can linear rails be customized or modified for unique industrial or automation needs?

Yes, linear rails can be customized or modified to meet unique industrial or automation requirements. Customization allows engineers and manufacturers to tailor linear rail systems based on specific needs. Here are some ways in which customization can be achieved:

  • Length and Size: Linear rails can be customized in terms of length and size to fit the spatial constraints of a particular application. This ensures optimal use of available space and allows for seamless integration into existing machinery.
  • Load Capacity: For applications with unique load requirements, linear rails can be designed or modified to accommodate higher or lower load capacities. Custom load-bearing capabilities ensure that the linear rail system meets the demands of the specific application.
  • Material Selection: The choice of materials used in the construction of linear rails can be customized to address specific environmental conditions or industry standards. Different coatings or materials may be selected for applications requiring resistance to corrosion, extreme temperatures, or harsh chemicals.
  • Special Coatings: Custom coatings can be applied to linear rails to enhance their performance in specific environments. For example, anti-corrosive coatings may be added for applications in corrosive or humid settings, while low-friction coatings can improve overall efficiency.
  • Integration of Accessories: Customization may involve the integration of accessories such as sensors, encoders, or additional components to meet automation or monitoring requirements. This ensures that the linear rail system aligns with the overall objectives of the industrial or automation setup.

Collaboration with manufacturers or suppliers experienced in linear motion systems is crucial when considering customization. They can provide insights, design expertise, and manufacturing capabilities to deliver a tailored solution that aligns with the unique needs and challenges of a specific industrial or automation application.

linear rail

Can you explain the advantages and key features of linear rails in various applications?

Linear rails offer several advantages and key features that make them essential in various applications:

  • Precision: Linear rails provide precise and accurate movement along a straight path, crucial for applications requiring high precision and repeatability.
  • Low Friction: The design of linear rails minimizes friction between the rail and carriage, ensuring smooth and efficient motion, reducing wear, and improving overall system performance.
  • High Load Capacity: Linear rails can support significant loads, making them suitable for applications with varying load requirements, from light-duty to heavy-duty.
  • Modularity: Many linear rail systems are modular, allowing easy customization and adaptation to different applications and environments.
  • Versatility: Linear rails accommodate different load types, including radial and axial loads, making them versatile for a wide range of applications such as robotics, CNC machines, and industrial automation.
  • Reduced Maintenance: The low-friction design and durable materials used in linear rails contribute to reduced maintenance requirements, increasing the overall lifespan of the system.

These advantages make linear rails a preferred choice in applications where precise linear motion, durability, and versatility are critical factors.

China wholesaler Vr1 Vr2 Vr3 Vr4 Vr6 Cage Guideways Cross Roller Linear Guide Rail  China wholesaler Vr1 Vr2 Vr3 Vr4 Vr6 Cage Guideways Cross Roller Linear Guide Rail
editor by CX 2024-04-17